1. When the room temperature is below zero degrees Celsius, the faucet is prone to abnormalities, such as abnormal hand feel of the faucet handle. At this time, hot water should be poured onto the faucet until it returns to normal before use, which will not affect the lifespan of the faucet.

2. The faucet at home often has dust and grime. During use, it is necessary to regularly clean the exterior and use a clean soft cloth and neutral soapy water to clean it. Do not use corrosive chemicals and sturdy brushes for cleaning, such as ammonia water, detergent, toilet soap, iron brushes, etc., to avoid external damage.

3. To ensure the durability of the product, the faucet should not be excessively tightened during use, and even traditional ones should not be forcefully tightened. It should quietly roll with the flow, even when closed. Another thing is not to use the faucet as a handrail to support heavy objects.

4. When there is bleach and various acids attached, it is necessary to immediately rinse with water, then soak with ammonia solution or neutral carbon soda solution, and wash with neutral detergent or warm water.

5. When the faucet is not used for a long time, it is recommended to close the main inlet valve at home.

Four tips to make faucets clean, healthy, and bright as new

Methods for removing water stains

Scale: Mirror and brushed exterior products

Things: rubber gloves, cloth, baking soda

Method:

1. First, wear rubber gloves and maintain both hands.

2. Wet the cloth with a little water, take an appropriate amount of baking soda and evenly spread it on the cloth, then spread out the palm of your hand.

3. Use a cloth dipped in baking soda to scrub the surface of the faucet back and forth. When the water stains are difficult to clean, use slight force to avoid damaging the product's appearance.

4. After finishing, rinse the surface of the faucet with clean water.

Methods for removing scale

Scale: Mirror and brushed exterior products

Things: rubber gloves, toothbrush, white vinegar, or professional scale remover

Method:

1. First, wear rubber gloves and maintain both hands.

2. Warm up with white vinegar and dip it in a damp cloth, then wrap it around the stubborn scale and wait for about 5-10 minutes to soften the scale.

3. Use a toothbrush to flush stubborn scale. If the flushing is incomplete, repeat step 2.

4. After finishing, rinse the surface of the faucet with clean water.

Methods for removing oil stains

Scale: Mirror and brushed exterior products

Things: rubber gloves, cloth, detergent

Method:

1. First, wear rubber gloves and maintain both hands.

2. Wet the cloth with warm water, then drop a proper amount of detergent and rub the cloth until a little foam appears.

3. Repeated wiping with a cloth can remove surface oil stains. For stubborn stains, a combination of baking soda can be used to remove them.

4. After finishing, rinse the surface of the faucet with clean water.

Improvement methods for faucet splashes

Scale: Mirror and brushed exterior products

Things: bubbler wrench, rubber gloves

Method:

1. First, wear rubber gloves and maintain both hands.

2. Rotate and unscrew the water ring by hand, remove the washer and bubbler. (For products without water wave exchange, you can directly use a bubbler wrench to unscrew the bubbler)

3. Turn on the faucet and reverse flush the bubbler. If the harder scale cannot be removed, it can be soaked in vinegar.

4. After flushing, replace the gasket and bubbler, screw on the water wave ring, and flush the waterway.

Article source: Guangdong faucet manufacturer

　　http://www.yingtuweiyu.com