1、 Press type faucet: Regardless of the appearance of the press type faucet, whether it has two handles for hot and cold water or only one handle that controls both, it operates according to certain basic principles. The following is how to disassemble a press type faucet and repair dripping problems: What is needed: Use these things to resist the press type faucet - a screwdriver, soaked in lubricating oil, carp pliers or adjustable wrench, and the pads to be replaced.

2、 Faucet valve seat: If the faucet still drips after replacing the gasket, there may be a problem with the faucet valve seat. A damaged gasket may cause the faucet valve seat to become uneven due to metal valve core wear, or the accumulation of chemicals in the water may form debris, which prevents the gasket from pressing against the valve seat. How to repair a broken faucet seat? Of course, you can replace the entire faucet. Another option is to only replace the faucet seat. If there is the right thing - called a valve seat wrench - then removing the old valve seat is a simple task. Insert the valve seat wrench into the valve seat and then turn it counterclockwise. Once you remove the old valve seat, please acknowledge that the new valve seat you purchased is the same as the original one. If the valve seat cannot be removed, insert a suitable position that can slide into the old valve seat and provide a sealed valve seat sleeve. There are two types of seat rollers or grinders that can flatten worn seats from scratch. Another option is to use a seat roller or grinder, which is a cheap tool that can flatten worn seats from scratch. Be careful not to use this thing for too long or with too much force, as the valve seat is made of soft metal and you can easily wear it off too much. When using a grinder, first remove the valve core of the faucet and insert the valve seat roller downwards into the valve seat in the faucet body. Rotate the object clockwise several times with moderate force. Then use a cloth to clean the metal shavings that have fallen off the valve seat.

3、 Sealing ring of faucet: Drip is generated when the faucet is closed; Leakage is caused by expired water flow in the faucet. If you see water pouring out from around the handle, your faucet is leaking; The first thing to do is to admit that the sealing nut of the faucet is tight, but be careful not to scratch the nut with pliers or wrenches. Here are the things you need to replace the faucet sealing ring: an adjustable wrench, a replacement faucet sealing ring, and Vaseline. If you find that the reason for the leakage is not due to the loose nut, then you need to replace the sealing ring. The sealing ring of a faucet can be a tight sealing ring composed of one or more O-ring rubber rings, or something like a thin rope or soft metal wire wrapped around the valve core under the sealing nut. When replacing the sealing ring of the faucet, proceed as follows: Process 1: Close the water supply and remove the faucet handle. Process 2: Unscrew the packing nut and remove both the nut and the old sealing ring from the valve core. Process 3: New sealing ring for equipment. If you are using a linear sealing material, wrap it around the valve core a few times. If it is a sealing material like soft metal wire, only wrap it around the valve core once. Before you assemble the faucet from scratch, apply a thin layer of petroleum jelly oil to the threads of the valve core and the sealing nut.

Article source: Guangdong faucet manufacturerhttp://www.yingtuweiyu.com/