Different types of faucets have different installation details. Today,Guangdong faucet manufacturerThe editor will provide us with an in-depth explanation.

Installation details of kitchen faucets

1. Remove the entire accessories of the faucet, such as the dental tube, rubber gasket, stainless steel gasket, fixing nut, etc.

2. Pass one of the inlet pipes through the faucet opening and through the countertop.

3. Screw the inlet pipe that has already passed through into the inlet hole below the faucet and tighten it appropriately.

4. Pass the entire removed dental tube through the inlet pipe that has been screwed into the faucet.

5. Thread the two inlet pipes through the entire dental tube and screw them into the other inlet below the faucet, and tighten them appropriately.

6. Align the dental tube with the bottom of the faucet and tighten it appropriately, adjust the position of the faucet, and then fix the accessories and tighten them appropriately.

Editor's Friendly Tip: When installing kitchen faucets, it is essential to be stable because they are frequently used and can easily loosen if broken. Therefore, locking the nut is crucial.

Installation details of bathroom basin faucet

1. Inventory the installation parts of the faucet. Firstly, let's put the copper buckle and a rubber pad into two hoses.

2. Thread one end of the two pipes through the hole in the washbasin.

3. First, thread the rubber pad into the hose, and then thread the copper wire in.

4. Screw the screw of the pipe onto the faucet.

5. Screw the copper wire onto the faucet and place it in the hole of the porcelain basin to fix the faucet.

Editor's Friendly Tip: When installing a faucet, it is necessary to choose a dedicated angle valve. And the angle valve must be fixed to the cold and hot water pipes of the wall outlet. If the inlet pipe is too long, it can be cut off, but do not bend it hard to 90 degrees or more. In addition, when installing the basin to remove water, please do not forget to purchase the small port of the faucet.

Installation details of constant temperature faucet

1. Users with small solid lumps in tap water are not suitable for using thermostatic faucets.

2. If the tap water contains powdery sediment or soft foreign objects, it may reduce the sensitivity of the thermostatic valve core and shorten the service life of the thermostatic faucet.

3. Try to shorten the interval between the water heater and the faucet as much as possible, so that hot water can quickly reach the faucet.

4. The cold and hot water supply pipes must not be installed incorrectly. The hot water pipe is on the left and the cold water pipe is on the right.

5. Before installing the thermostatic faucet, it is necessary to clean the installation site to prevent small sand and hard blocks from damaging the rubber ring, thread, thermostatic valve core, and other parts of the faucet.

6. Please install according to the instructions in the manual, taking special care not to miss, lose, or damage any gaskets or rubber rings.

　　文章源自：Guangdong faucet manufacturer

　　http://www.yingtuweiyu.com