After using the faucet for a period of time, many will experience dripping or leaking water. Most buyers directly replace the faucet. If the faucet is still in use, directly replacing it will cause a significant waste of resources. Here are some tips from Guangdong faucet manufacturers to solve dripping and leaking faucets.

The dripping and leaking of the faucet are often caused by small components and bad pipes in between. The reason for water leakage in the lower gap of the faucet bolt is due to the wear of the triangular sealing gasket inside the gland. At this point, you can use screws to loosen and remove the bolt head, then loosen and remove the gland, and then remove the triangular seal on the inner side of the gland and replace it with a new one. Another possibility is that the wear of the axial gasket inside the faucet can also cause water dripping and leakage. Simply use pliers to loosen and remove the gland bolt, use a clamp to remove the axial gasket, and replace it with a new axial gasket to solve the problem of water leakage in the faucet. There are many reasons for water leakage in faucets, some of which are only caused by replacing the small components inside. Simply replace the damaged parts, so that the entire faucet does not need to be replaced and resources can be saved effectively.

Article source: Guangdong faucet manufacturer

　　http://www.yingtuweiyu.com