After using the stainless steel shower faucet for a long time, it is easy to block due to water quality and quality reasons, and many people do not know what to do. BelowGuangdong faucet manufacturerThe editor will share with you the solutions to the blockage of the stainless steel shower faucet.

1. Use acupuncture

Assuming that some of the small holes in your stainless steel shower faucet are blocked, let's drain the water first to see which holes are actually blocked. Then you have to open the stainless steel shower faucet head of the shower, and see that the stainless steel shower faucet head, like the shower head, has a lot of small holes. This is the place where the water flows out. So let's first prepare a needle, and then use a needle to pierce the impurities in the hole that did not come out of water, until there are no impurities in the hole. This method is direct, but be careful not to puncture the stainless steel shower faucet hole.

2. Soak in vinegar

Assuming that your stainless steel shower faucet has been blocked for a long time, and many holes have been blocked. So using a needle to puncture one by one is obviously not very obvious. In this case, we suggest that you use acidification and dust removal to address the problem of clogging of the stainless steel shower faucet in the shower. You need to prepare some white vinegar. Pour the vinegar into a basin until the stainless steel shower faucet can be submerged. After about ten minutes of soaking in vinegar, the scale in the stainless steel shower faucet can be removed.

3. Use lubricant

Assuming that the stainless steel shower faucet metal rust causes severe blockage, then WD-40 rust removal and rust prevention lubricant should be used. This rust removal lubricant has excellent affinity and permeability with metals. Can separate the rusty layer from the metal layer. Make the rusted part in contact with the metal and leave a protective film. Let the shower never rust to death. If the stainless steel shower faucet in your home is not made of stainless steel, you may use this method.

4. Wipe with a towel

Assuming that your stainless steel shower faucet has been around for a certain number of years and its appearance is also quite old. It is still recommended that you replace the shower with a new one. The continuous use of such stainless steel shower faucets is detrimental to health. Because there may be a lot of harmful bacteria and impurities gathering inside.

Assuming that the stainless steel shower faucet in your home is still in good condition, you should not take it lightly, but start with prevention. It is important to develop a good habit of taking a shower in daily life. Before each shower, use a towel to thoroughly clean the stainless steel shower faucet outlet of the shower to prevent any remaining scale. For the water outlet of rubber material, it can be rubbed with your fingers. Assuming that stainless steel and copper materials can be used with paper clips to clear the water outlet.

　　文章源自：Guangdong faucet manufacturer

　　http://www.yingtuweiyu.com