What are the reasons for water leakage at the faucet?

2020-10-30 1207

1. The reason for water leakage at the water outlet is caused by the wear of the axial gasket inside the faucet. Use pliers to loosen and remove the gland bolt, remove the shaft gasket with a clamp, and replace it with a new shaft gasket. Stainless steel faucet


2. Reason for water leakage in the lower gap of the faucet bolt: It is caused by the wear of the triangular sealing gasket inside the gland. Be able to loosen the screws and remove the bolt head, then loosen and remove the gland, and then remove the triangular seal on the inner side of the gland and replace it with a new one.

广东水龙头厂家

3. Leakage at the joint of the connecting pipe: It is generally due to the loosening of the cap nut. It is possible to retighten the cap nut or replace it with a new U-shaped sealing gasket. 4. Water loss situation: It may be due to water leakage. Due to the water stop disk of the single gun faucet getting stuck with sand and gravel, this phenomenon is still caused by a specialized repairman disassembling the faucet for sorting. However, if the rubber pad is damaged, it is necessary to replace it.


Article source: Guangdong faucet manufacturer

  http://www.yingtuweiyu.com