Method for replacing the valve core of cold and hot faucets
Nowadays, most households use high-quality faucets that can adjust the proportion of cold and hot water. If the faucet is used for a long time, there will be a problem of water leakage, which is usually caused by the valve core being damaged. Simply replace the valve core to ensure normal operation. Replacing the valve core is not a difficult task, we can start replacing it ourselves. belowGuangdong faucet manufacturerLet's introduce the replacement method and process for the valve core of the cold and hot faucet!
1. Prepare something
The valve core is broken, we need to purchase a replacement with the same model first. In general, you can buy the valve core of any brand of faucet from a store of that brand, and you can buy it at all. After selecting the valve core, prepare a flat or cross screwdriver, perhaps an Allen wrench, which should be selected based on the screws of your own faucet. Then prepare a pointed nose pliers and a small knife.
2. Remove the cold and hot water buttons
Before replacing the valve core, it is necessary to first find the water source switch of this faucet, and then turn it off to avoid spraying water during replacement. Then find the button for the cold water, perhaps a plastic cap, and use a small knife to quietly pry it off, so that you can see the screws inside.
3. Remove the handle
After flipping on the hot and cold water buttons, check the shape of the screws, whether they are straight or cross shaped, or maybe hexagonal screws, and then decide which type of screwdriver to use, perhaps an Allen wrench. Use a screwdriver to remove the screws inside the hole, and then you can remove the handle of the faucet.
4. Remove the valve core
After removing the handle, you can see the valve core inside. Some valve cores also have a fixed outer shell cover. Just remove the cover. Then you can see the clamp that fixes the valve core. There are usually four claws on the clamp. Use the two ends of the pointed nose pliers to clamp the two claws, and then rotate clockwise to remove the clamp.
5. Installation
After removing the card, the damaged valve core can be removed. Then, install the new valve core, reverse the previous process, and reinstall the other components. After installing the faucet handle, check the water source valve to see if it leaks. If there are no problems, lock the handle tightly and install the cold and hot water plastic cap.
文章源自：Guangdong faucet manufacturer
-
04-21
Guangdong faucet manufacturer: The water output of the pull-out faucet is very small, how should we solve it?
The water pressure is too lowThe working pressure of the faucet is from 1 bar to 12 bar, and the normal working pressure is 3 bar (3 kilograms of water pressure). The flow rate can reach about 8 liter
-
03-22
Pulling faucet: How to solve the problem of small water output from a pulling faucet
The kitchen is using a faucet and suddenly finds that the water from the pull-out faucet has decreased. How can we determine the cause of the malfunction and solve this problem?The water pressure is t
-
12-01
Guangdong faucet manufacturer: treatment methods for dripping water from different faucets
1、 Press type faucet: Regardless of the appearance of the press type faucet, whether it has two handles for hot and cold water or only one handle that controls both, it operates according to certain b
-
11-08
The advantages and disadvantages of pulling the faucet
The pull-out faucet is much more convenient to use than traditional faucets, so it is favored by many consumers. Many people have questions when they see a pull-out faucet. Is it easy for a pull-out f