How to disassemble the kitchen faucet?

2020-06-04 2760

1. The interface is rusty and difficult to remove: When disassembling the faucet in the bathroom, at least the connection at the inlet pipe is easily separated. In the kitchen, whether it is the water inlet port or the connection between the faucet and the countertop, both ports are difficult to unscrew.


2. Saw off the faucet above the countertop with a saw: Although oil dripped on the joint and tightened it vigorously, after more than ten minutes, the joint remained motionless, so the saw can only be used continuously to disassemble it. The kitchen countertop is not like the bathroom countertop and cannot be removed. Therefore, the faucet part above the countertop can only be sawn off first, so that the faucet is separated from the countertop.

抽拉水龙头

3. Using a saw to separate the water inlet pipe and hose: Since there was no problem of separating the water inlet hole and hose during the installation of the bathhouse faucet, it would be difficult to connect the sawn water inlet hole with a new hose if it were cut directly.


Article source: Pulling the faucet

  http://www.yingtuweiyu.com