Appearance:

When selecting, it is qualified to ensure that there are no bubbles, defects, or scratches in the bright light. Generally, faucets only require a coating of 10 or more microns, with the intention of rust prevention, beauty, and ensuring service life. There is a leak from an expert. When selecting, press the appearance of the faucet with your finger, and the fingerprints will quickly dissipate, indicating that the coating is good; The more fingerprints are printed, the worse they become.

After selecting the appearance, you also need to taste the feel of the faucet, whether the switch is smooth or not. The fluctuation of the up, down, left, and right switches can adjust the water temperature without disorder. Generally, it is better to reach 30 degrees up and down, and 90 degrees around. But one thing to be careful of is that a light faucet does not necessarily mean a good feel.

Style:

The current stainless steel faucets on the market are generally divided into two styles, namely single handle faucets and double handle faucets. Single handle faucets only have one hole, while double handle faucets can also be divided into four inch holes and eight inch holes, which can be determined based on the style of the purchased basin.

The basin faucet and kitchen faucet are usually installed on the countertop, so their inlet pipes can be hard pipes or flexible pipes, with a length of about 35 centimeters. To facilitate connection, a valve needs to be installed at the connection between the household water pipe and the faucet inlet pipe, which is called a three-angle valve. When purchasing the faucet, do not forget to match it together, otherwise you will have to run it again, and the three-angle valve has different specifications, It depends on the specifications of the inlet pipe of the faucet you purchased, and there are generally two types: 3 points and 4 points.

Also, it is important to be careful not to install the triangular valve too low when installing the equipment, to prevent the water inlet pipe of the faucet from being too long and unable to connect, which may cause unnecessary trouble. Generally, it can be installed about 50 to 60 centimeters above the ground.

Another thing is that when buying a faucet, you must not forget to inventory the spare parts, otherwise it will be even more difficult to take it back and install it. The accessories of a general basin faucet mainly include a water remover, a pull rod, and faucet fixing bolts, as well as fixing copper plates and gaskets; The bathtub faucet also needs standard accessories such as a shower, two water inlet hoses, and brackets. The mixed water faucets produced by the standardized company are equipped with equipment specification drawings and usage instructions when leaving the factory, so be careful when selecting them. Imported goods need to be more careful.

Article source: Guangdong faucet manufacturer

　　http://www.yingtuweiyu.com