When the kitchen faucet is not easy to use, insensitive, and has a jamming feeling, or if it is improperly assembled or has problems with its components, we need to replace it to ensure its normal use. It is very necessary to understand its replacement method. BelowGuangdong faucet manufacturerThe editor will introduce how to replace the kitchen faucet.

1： The first thing to prepare is a screwdriver, wrench, and pliers. If only replacing components (such as sealing rings), then prepare this component. Then close the main valve.

2： Remove the small screws on or behind the faucet handle and remove the handle fixed to the faucet body. Some faucet screws are hidden under metal buttons, plastic buttons, or plastic sheets. As long as the button is opened, you will see the handle screw installed at the top. The screws of a faucet that has been in use for a long time may become very tight due to rust and other reasons, allowing some lubricating oil to drip in.

3： If the screw is hidden in the hole, it is recommended to use a flashlight to investigate first. The first step is to see what the fixed screw inside is, whether it is a cross or a straight line, and then use the corresponding screwdriver to loosen it. The screw of a small number of brand faucets has an inner square hole (such as Moen), which can be difficult to remove. When using it as a substitute, be careful not to damage the screw port. After loosening this screw, the handle can be removed.

4： At this point, what you see is a large copper nut. After using a large adjustable wrench to open the nut, you can remove the valve core of the faucet. Investigate whether the copper surface under the valve core is uneven or has fine sand particles, and remove them thoroughly.

　　文章源自：Guangdong faucet manufacturer

　　http://www.yingtuweiyu.com