Drip is generated when the faucet is closed; Leakage is caused by expired water flow in the faucet. If you see water pouring out from around the handle, your faucet is leaking; The first thing to do is to confirm that the sealing nut of the faucet is tight, but be careful not to scratch the nut with pliers or wrenches.

What you need to replace the faucet seal ring: an adjustable wrench, a replacement faucet seal ring, and petroleum jelly. If you find that the reason for the leakage is not due to the loose nut, then you need to replace the sealing ring.

The sealing ring of a faucet can be a tight sealing ring composed of one or more O-ring rubber rings, or something like a thin rope or soft metal wire wrapped around the valve core under the sealing nut.

When replacing the sealing ring of the faucet, follow the following steps:

1. Close the water supply and remove the faucet handle.

2. Unscrew the packing nut and remove both the nut and the old sealing ring from the valve core.

3. Install a new sealing ring. If you are using a linear sealing material, wrap it around the valve core a few times. If it is a sealing material like soft metal wire, only wrap it around the valve core once. Before reassembling the faucet, apply a thin layer of petroleum jelly oil to the threads of the valve core and the sealing nut.

Article source: Guangdong faucet manufacturer

　　http://www.yingtuweiyu.com