2021-12-01 1694
1、 Press type faucet: Regardless of the appearance of the press type faucet, whether it has two handles for hot and cold water or only one handle that controls both, it operates according to certain b
2021-11-08 2525
The pull-out faucet is much more convenient to use than traditional faucets, so it is favored by many consumers. Many people have questions when they see a pull-out faucet. Is it easy for a pull-out f
2021-10-13 1576
Treatment method for water leakage of faucetsIn daily life, sometimes it is found that the water from the faucet still drips after tightening, and it drips continuously from the outlet or joint of
2021-05-25 1782
How to clean stains on stainless steel faucets?Prepare salt and vinegar, mix the salt and vinegar together, stir until the salt is fully diluted in the vinegar, and then heat it. After heating, soak t
2021-04-28 1921
Is the kitchen faucet properly installed with a single handle? Would it be better to have a double handle? Next, let's take a look at the unique features of single and double handle faucets.1. Fe
2021-04-07 1646
1、 Appearance treatmentCopper faucet: The appearance needs to be electroplated, and the chrome coating can only last for 3-5 years. It cannot be repaired after detachment and wear, and it affects the
2021-03-16 2325
Drip is generated when the faucet is closed; Leakage is caused by expired water flow in the faucet. If you see water pouring out from around the handle, your faucet is leaking; The first thing to do i
2021-02-22 1433
1、 Maintenance methods1. First, tighten the faucet and use a pliers to rotate the faucet counterclockwise to remove it. Stainless steel faucet 2. Turn the threaded hole outward and wrap it 5-6 times c
2021-01-19 1435
Introduction to the types of faucet valve cores:At present, there are three common materials for the valve cores of faucets sold in the market: ceramic, stainless steel, roller type, etc. The quality
2020-12-29 1314
Weight: You cannot purchase a faucet that is too light. Being too light is mainly due to some manufacturers hollowing out the copper inside in order to reduce costs. The faucet looks large and is not